GENERAL INFO
TOTAL WEIGHT LIMIT
400 lbs
RIDER HEIGHT
R: 5’3″ -5’10” | L: 5’10” – 6’4″
EBIKE CLASS
Class 2 Ebike
BATTERY SAFETY CERTIFICATIONS
BIKE SAFETY CERTIFICATIONS
WATER RESISTANCE
Bike – IPX5 // Components – IPX6
FRAMESET
FRAME
6061 Aluminum, Gravity Cast Front Triangle
FORK
Aventon/Zoom Suspension Fork, 80mm travel, with lockout
WHEELSET
FRONT WHEEL
26″, 36 hole, 13g, Double Wall Aluminum Fat Tire Rim, Nutted Axle, Schrader Valve
REAR WHEEL
26″, 36 hole, 12g, Double Wall Aluminum Fat Tire Rim, Nutted Hub Drive, Schrader Valve
TIRES
Inova 26×4.0 puncture resistant
EBIKE SYSTEM
MOTOR
36V, 750W Hub Drive
MOTOR POWER
750W (1188 Peak)
BATTERY
Removable Internal Lithium-ion. 36V, 20Ah, 733Wh, LG 21700 cells
THROTTLE
Aventon LH Handlebar Mounted
SENSORS
Double Sided Bottom Bracket Torque Sensor
CHARGER
36V Output: 42V/ 4A
CHARGING TIME FROM 0% TO 100%
5 hours
LIGHTS
Front and rear lights integrated
BRAKES
FRONT BRAKE
Tektro HD-E3520 hydraulic disc brakes w/ EJ1 quick disconnect wire
REAR BRAKE
Tektro HD-E3520 hydraulic disc brakes w/ EJ1 quick disconnect wire
FRONT BRAKE ROTOR
Tektro 180mm 6 bolt
REAR BRAKE ROTOR
Tektro 180mm 6 bolt
DRIVETRAIN
REAR DERAILLEUR
Shimano Altus 8-Speed
SHIFTER
Shimano 8-Speed Trigger
CASSETTE
12-32T / 8 Speed Shimano CS HG200-8
CRANKSET
3pc, 170mm crank arm
BOTTOM BRACKET
100×177 Square Taper, Double Sided Torque sensor bottom bracket
PEDALS
9/16″ Alloy Platform
COCKPIT
SEATPOST
Aventon Suspension Seatpost, Ø 30.9mm, 350mm Length. 50mm travel
HANDLEBARS
Aluminum 31.8mm, 680mm
GRIPS
Aventon Lock on grips
HEADSET
Sealed bearing H887 Peilin 28.6mm * 56mm * 56mm H18.6mm 7pcs
INCLUDED ACCESSORIES
KICKSTAND
Included, rear mount
Technical Overview
The Aventure 3 ships as a Class II ebike, with pedal assist and throttle. The Aventure 3 will also operate with the throttle unplugged and removed, should you want to ride in an area that only allows Class I ebikes or throttles are prohibited. Aventon ebikes are built to the IPX5-rated standard. An IPX5 rating means the bike is protected against low-pressure water jets from any direction. This provides a moderate level of water resistance, allowing you to ride in light to moderate rain or through small puddles. However, IPX5 does not mean waterproof—Aventon ebikes are not designed for full submersion. Avoid using a pressure washer or high-pressure sprayer to clean your ebike, as pressurized water can still damage components. *Max range is determined using PAS 1 on flat terrain with a rider weight of 160 lb.*